View MPSA56_1126851.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

UTC MPSA06/56
NPN MPSA06 PNP MPSA56
FEATURES
*Collector-Emitter Voltage: VCEO=80V *Collector Dissipation: PD=625mW
AMPLIFIER TRANSISTOR
1
TO-92
1: EMITTER
2: BASE
3: COLLECTOR
ABSOLUTE MAXIMUM RATINGS (TA=25C, unless otherwise specified)
PARAMETER
Collector-base voltage Collector-emitter voltage Emitter-base voltage Collector current - Continuous Total device dissipation, @TA=25C Derate above 25C Total device dissipation, @TC=25C Derate above 25C Junction Temperature Storage Temperature
SYMBOL
VCBO VCEO VEBO Ic PD PD Tj TSTG
RATING
80 80 4 500 625 5 1500 12 -55 ~ +150 -55 ~ +150
UNIT
V V V mA mW mW/C mW mW/C C C
THERMAL CHARACTERISTICS
PARAMETER SYMBOL MAX UNIT
C/W C/W Thermal resistance, junction to ambient RJA (note) 200 Thermal resistance, junction to case RJC 83.3 Note: RJA is measured with the device soldered into a typical printed circuit board.
ELECTRICAL CHARACTERISTICS (Ta=25C, unless otherwise specified)
PARAMETER
OFF CHARACTERISTICS Collector-emitter breakdown voltage (note 1) Emitter-base breakdown voltage Collector cutoff current Collector cutoff current
SYMBOL
V(BR)CEO V(BR)EBO ICES ICBO
TEST CONDITIONS
IC=1.0mA, IB=0 IE=100A, Ic=0 VCE=60V, IB=0 VCB=80V, IE=0
MIN
80 4
TYP
MAX
UNIT
V V A A
0.1 0.1
UTC
UNISONIC TECHNOLOGIES CO., LTD.
1
QW-R201-035,A
UTC MPSA06/56
PARAMETER
ON CHARACTERISTICS DC current gain Collector-emitter saturation voltage Base-emitter on voltage SMALL-SIGNAL CHARACTERISTICS Current gain bandwidth product (note 2)
AMPLIFIER TRANSISTOR
SYMBOL
hFE VCE(sat) VBE(on) fT
TEST CONDITIONS
IC=10mA, VCE=1V IC=100mA, VCE=1V IC=100mA, IB=10mA IC=100mA, VCE=1V MPSA06: IC=10mA, VCE=2V, f=100MHz MPSA56: IC=100mA, VCE=1V, f=100MHz
MIN
100 100
TYP
MAX
UNIT
0.25 1.2
V V
100 50
MHz MHz
Note 1: Pulse test: PW<=300s, Duty Cycle<=2% Note 2: fT is defined as the frequency at which IhfeI extrapolates to unity.
SWITCHING TIME TEST CIRCUITS
Figure 1 (Note: Total shunt capacitance of test jig and connectors for PNP test circuits, reverse all voltage polarities.)
MPSA06
MPSA56
CURRENT-GAIN BANDWIDTH PRODUCT
Figure 2
Figure 3
UTC
UNISONIC TECHNOLOGIES CO., LTD.
2
QW-R201-035,A
UTC MPSA06/56
MPSA06
AMPLIFIER TRANSISTOR
MPSA56 CAPACITANCE
Figure 4
Figure 5
SWITCHING TIME
Figure 6
Figure 7
ACTIVE-REGION SAFE OPERATING AREA
Figure 8
Figure 9
UTC
UNISONIC TECHNOLOGIES CO., LTD.
3
QW-R201-035,A
UTC MPSA06/56
MPSA06
AMPLIFIER TRANSISTOR
MPSA56 DC CURRENT GAIN
Figure 10
Figure 11
"ON" VOLTAGES
Figure 12
Figure 13
COLLECTOR SATURATION REGION
Figure 14
Figure 15
UTC
UNISONIC TECHNOLOGIES CO., LTD.
4
QW-R201-035,A
UTC MPSA06/56
MPSA06
AMPLIFIER TRANSISTOR
MPSA56
BASE-EMITTER TEMPERATURE COEFFICIENT
Figure 16
Figure 17
THERMAL RESPONSE
Figure 18
UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
UTC
UNISONIC TECHNOLOGIES CO., LTD.
5
QW-R201-035,A

▲Up To Search▲

Price & Availability of MPSA56

	To Download MPSA56 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .